- Electrical parameter measurement function (voltage, current, active power, energy)
- Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
- Power alarm threshold preset function (can set power alarm threshold).
- The reset function of energy key.
- Store data when power off.
- Large-screen LCD with backlight function.
- This module is suitable for indoor, please do not use outdoor.
- Applied load should not exceed the rated power.
- Wiring order can’t be wrong.
Technical Specifications / Display format：
- Power: test range: 0-22kW
Within 1kW, the display format is 0.0-999.9W;
Within 1kW-10kW, the display format is1000-9999W;
10kW and above, the display format is 0.1-22.0kW
- Energy: test range: 0-9999kWh
Within 10kWh, the display format is 0-9999Wh
10kW and above, the display format is 10-9999kWh
- Voltage: test range: 80-260V
Display format: 80-260V
- Current: test range: 0-100A
Display format: 0.00-99.99A
- Color: Black
- Size: Approx. 90*50*25mm
- Net Weight: 94g
- 1 x AC Digital Panel Power Meter
- 1 x CT (Current Transformer)
- 1 x English User Manual
Display interface is large-screen LCD, it can display voltage, current, power, energy parameters at the same time, as shown in figure
KEY / BUTTON USAGE
- Backlight control
Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
- Reset energy
Step1: Long press the key for 5 seconds until the number in energy display window flash, then release the key.
Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. If you don’t want to clear, then long press the key for 5 seconds until the number doesn’t flash, it means the energy value is not cleared and will exit the reset state.
- Set power alarm threshold
Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state
Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0 – 22kW
There are no reviews yet.